Intel M50CYP2SB Series Page 36 Technical Specification Download

Page: 36 / 160

Intel® Server Board M50CYP2SB Family Technical Product Specification

3.3

Processor Family Overview

The Intel® Server Board M50CYP2SB family supports the 3

Gen Intel® Xeon® Scalable processor family with

a maximum thermal design power (TDP) limit of 270 W.

Processor shelves within the product family are identified as shown in the following figure.

Figure 19. 3

Gen Intel® Xeon® Scalable Processor Identification

Note:

Supported 3

Gen Intel® Xeon® Scalable processor SKUs must Not end in (H), (L), (U), (Q), or (M). All

other processor SKUs are supported.

* Note:

The 8351N SKU is a single-socket optimized SKU and is not supported on the Intel® Server

Board

M50CYP2SB

family.

Summary of Contents for M50CYP2SB Series

































































































































































Search results

Summary of Contents for M50CYP2SB Series

Reviews:

Related manuals for M50CYP2SB Series

Brands by name

Popular brands

Intel M50CYP2SB Series, Technical Specification

Search results

Summary of Contents for M50CYP2SB Series

Reviews:

Related manuals for M50CYP2SB Series

Brands by name

Popular brands