Intel® Server System M20NTP1UR - System Integration and Service Guide
62
6.6.3
2.5” Drive Replacement
1.
Remove the screws securing the 2.5” drive assembly to the drive carrier (See
Figure 69. 2.5” Drive Mounting Bracket Removal from Drive Carrier (Step 1)
2.
Remove the drive mounting bracket from the drive carrier (See
Figure 70. 2.5” Drive Mounting Bracket Removal from Drive Carrier (Step 2)
•
Hold the carrier assembly top side down in your right hand. Using your left hand, gently rotate
the bottom edge of the left rail upwards (see Letter “A”) while at the same time pushing the drive
down away from the carrier (see Letter “B”).
3.
Remove the drive from the mounting bracket (See
Figure 71. 2.5” Drive Removal from Mounting Bracket
•
Remove the two screws securing the drive to the mounting bracket (See Letter “D”)
•
Lift the drive out of the mounting bracket
Summary of Contents for M20NTP1UR
