Intel® Server System M20MYP1UR System Integration and Service Guide
39
3.3
Intel® Embedded Server RAID Technology 2 (Intel® ESRT2) RAID5 Key
–
Installation / Removal
–
(IPC RKSATA4R5)
Required Tools and Supplies:
•
Anti-static wrist strap and conductive workbench pad (recommended)
3.3.1
Installing the Intel® ESRT2 RAID 5 Key
Figure 40. Intel® ESRT2 RAID 5 key location
1.
Power off the system and disconnect the AC power cord.
2.
Remove the system top cover (see Section 2.2.1).
3.
Remove the Intel® ESRT2 RAID 5 Key from its packaging.
4.
Locate the key connector shown in the above figure.
5.
Place the key over the connector and match the orientation of the key to that of the connector.
6.
Press the key down onto the connector.
3.3.2
Removing the Intel® ESRT2 RAID 5 Key
1.
Power off the system and disconnect the AC power cord
.
2.
Remove the system top cover (see Section 2.2.1).
3.
Using the key pull tab, pull the key up until it disengages from the connector.
