Intel IP Media Server, Demo Manual

Page: 15 / 56

IP Media Server for HMP Demo Guide — July 2005 15
3
3.
Preparing to Run the Demo
This chapter discusses the preparations necessary to run the IP Media Server for HMP demo. It
provides information about the following topics:
• Editing Configuration Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
• Compiling and Linking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.1 Editing Configuration Files
This section discusses how to configure the demo for your system. It contains the following topics:
• Configuration File Location
• Editing the IPMediaServer.cfg Configuration File
3.1.1 Configuration File Location
Before running the IP Media Server for HMP demo, modify the IPMediaServer.cfg file to reflect
your system environment. Use a text editor and open the file from the following location:
Windows
$(INTEL_DIALOGIC_DIR)\Demos\IPMediaServer\Release
Linux
$(INTEL_DIALOGIC_DIR)/demos/IPMediaServer/Release
3.1.2 Editing the IPMediaServer.cfg Configuration File
Below is an example of the IPMediaServer.cfg file. Update the following information:
ipProtocolName
The IP protocol for opening IP line devices. Possible vlues are:
• H323
• SIP
• both
DTMFmode
Specifies how DTMF tones are transmitted. Possible values are:
• OutofBand – usually used with low bandwith coders, such as GSM
Note: OutofBand is used for H.323 only.