Intel IP Media Server, Demo Manual

Page: 18 / 56

18 IP Media Server for HMP Demo Guide — July 2005
Preparing to Run the Demo
MediaAlarmLostPackets
{
Threshold = 20 # Threshold value
DebounceOn = 10000 # Threshold debounce ON
DebounceOff = 10000 # Threshold debounce OFF
Interval = 1000 # Threshold Time Interval (ms)
PercentSuccess = 60 # Threshold Success Percent
PercentFail = 40 # Threshold Fail Percent
}
MediaAlarmJitter
{
Threshold = 60 # Threshold value
DebounceOn = 20000 # Threshold debounce ON
DebounceOff = 60000 # Threshold debounce OFF
Interval = 5000 # Threshold Time Interval (ms)
PercentSuccess = 60 # Threshold Success Percent
PercentFail = 40 # Threshold Fail Percent
}
# MediaAlarmResetAlarmState = 0
}
3.2 Compiling and Linking
Compile the IP Media Server demo project within one of the following environments:
Windows
To compile the IP Media Server demo on a Windows system, use Microsoft* Visual Studio* 6.0
with Service Pack 5.
Set IPMediaServer as the active project and build.
Linux
To compile the IP Media Server demo on a Linux system, use gcc version 3.2.3.
To compile the entire project, go to the directory
$(INTEL_DIALOGIC_DIR)/demos/IPMediaServer and issue the commands:
make clean
make
To compile an individual module, go to the specific module directory (for example,
$(INTEL_DIALOGIC_DIR)/demos/IPMediaServer/Modules/FaxModule for the fax module), and
issue the commands:
make clean
make