BIOS SETUP
IB935 User’s Manual
29
Advanced BIOS Features
This section allows you to configure and improve your system and
allows you to set up some system features according to your preference.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
CPU Feature
Press Enter
ITEM HELP
Hark Disk Boot Priority
Press Enter
Menu Level >
Virus Warming
Disabled
CPU L3 Cache
Enabled
Quick Power On Self Test
Enabled
First Boot Device
CDROM
Second Boot Device
Legacy LAN
Third Boot Device
Hard Disk
Boot Other Device
Enabled
Swap Floppy Drive
Disabled
Boot Up Floppy Seek
Disabled
Boot Up NumLock Status
On
Gate A20 Option
Fast
Typematic Rate Setting
Disabled
Typematic Rate (Chars/Sec)
6
Typematic Delay (Msec)
250
Security Option
Setup
APIC Mode
Enabled
MPS Version Control for OS
1.4
OS Select For DRAM>64MB
Non-OS2
Report No FDD For WIN 95
No
Small Logo (EPA) Show
Disabled
CPU Feature
Press Enter to configure the settings relevant to CPU Feature.
Hard Disk Boot Priority
Press Enter to configure the settings.
Virus Warming
If this option is enabled, an alarm message will be displayed when trying
to write on the boot sector or on the partition table on the disk, which is
typical of the virus.
CPU L3 Cache
Cache memory is additional memory much faster than conventional
DRAM (system memory). CPUs from 486-type on up contain internal
cache memory, and most, but not all, modern PCs have additional
(external) cache memory. When the CPU requests data, the system
transfers the requested data from the main DRAM into cache memory,
for even faster access by the CPU. By default, these items are enabled.
Quick Power On Self Test
When enabled, this field speeds up the Power On Self Test (POST) after
the system is turned on. If it is set to
Enabled
, BIOS will skip some
items.
