Intel Express 550F, User Manual, Page: 82 / 162

72
C H A P T E R 4 Advanced Configuration
72
Adding a routing link
To add a routing link to a VLAN that is not already configured:
1 Select
VLAN/Routing Setup>Add
.
2 Select the
Setup an IP routing interface
box.
3 Click
Next
, and follow the instructions in the Wizard windows.
Changing IP and IPX
details
To change the routing protocol details for an existing VLAN:
1 Select
VLAN/Routing Setup
.
2 Click
Routing
.
3 Select the
Use IP routing
or
Use IPX routing
box to
make active (if possible).
4 Double-click the required field, type the new value and select
the correct protocol parameters.
5 Click
OK
.
Adding a static route
A static route is a permanent entry in the routing table and is a path to
IP network which is not announced by the RIP. A static route is an-
nounced to other switches or stacks using RIP. To add a static route:
1 Select
VLAN/Routing Setup
.
2 Click
Advanced>IP Routing
3 Click
Add
4 Double-click the required field, and type the new value.
5 Click
OK
.
500.book Page 72 Thursday, September 2, 1999 1:50 PM