manualshive.com logo in svg

Intel DG33BU, Product Manual, Page: 62 / 75

Share
Download
Intel DG33BU Product Manual Download Page 62

Intel Desktop Board DG33BU Product Guide 

62 

 CAUTION 

Do not interrupt the process or the system may not function properly. 

 

1.

 

Uncompress the BIOS update file and copy the .BIO file, IFLASH.EXE, and .ITK file 
(optional) to a bootable USB flash drive or other bootable USB media. 

2.

 

Configure the BIOS or use the F10 option during POST to boot to the USB device. 

3.

 

Manually run the IFLASH.EXE file from the USB device and manually update the 
BIOS. 

Recovering the BIOS 

It is unlikely that anything will interrupt the BIOS update; however, if an interruption 
occurs, the BIOS could be damaged.  Due to BIOS size and recovery requirements, a 
CD-R with the .BIO file in the root directory will be required.  

Related Links: 

For more information about updating the Intel Desktop Board BIOS or recovering from 
a BIOS update failure, go to: 

http://support.intel.com/support/motherboards/desktop/sb/CS-022312.htm

  

Summary of Contents for DG33BU












































































Reviews:

No comments