Intel Desktop Board D2700MUD Specification Download Page 85

Page: 85 / 96

Regulatory Compliance and Battery Disposal Information

Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC,

2006/95/EC & 2002/95/EC.
Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC,

2006/95/EC & 2002/95/EC.
Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív

2004/108/EC, 2006/95/EC a 2002/95/EC.
Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC,

2006/95/EC in 2002/95/EC.
Svenska Denna produkt har tillverkats i enlighet med EG-direktiv 2004/108/EC,

2006/95/EC & 2002/95/EC.
Türkçe

Bu ürün, Avrupa Birliği’nin 2004/108/EC, 2006/95/EC ve 2002/95/EC

yönergelerine uyar.

5.1.3

Product Ecology Statements

The following information is provided to address worldwide product ecology concerns

and regulations.

5.1.3.1

Disposal Considerations

This product contains the following materials that may be regulated upon disposal:

lead solder on the printed wiring board assembly.

5.1.3.2

Recycling Considerations

As part of its commitment to environmental responsibility, Intel has implemented the

Intel Product Recycling Program to allow retail consumers of Intel’s branded products

to return used products to selected locations for proper recycling.
Please consult the

http://www.intel.com/intel/other/ehs/product_ecology

for the

details of this program, including the scope of covered products, available locations,

shipping instructions, terms and conditions, etc.

中文

作为其对环境责任之承诺的部分，英特尔已实施

Intel Product Recycling Program

（英特尔产品

回收计划），以允许英特尔品牌产品的零售消费者将使用过的产品退还至指定地点作恰当的重复使用
处理。

请参考

http://www.intel.com/intel/other/ehs/product_ecology

了解此计划的详情，包括涉及

产品之范围、回收地点、运送指导、条款和条件等。

Deutsch
Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das Intel

Produkt-Recyclingprogramm implementiert, das Einzelhandelskunden von Intel

Markenprodukten ermöglicht, gebrauchte Produkte an ausgewählte Standorte für

ordnungsgemäßes Recycling zurückzugeben.
Details zu diesem Programm, einschließlich der darin eingeschlossenen Produkte,

verfügbaren Standorte, Versandanweisungen, Bedingungen usw., finden Sie auf der

http://www.intel.com/intel/other/ehs/product_ecology

Summary of Contents for Desktop Board D2700MUD

































































































Search results

Summary of Contents for Desktop Board D2700MUD

Reviews:

Related manuals for Desktop Board D2700MUD

Brands by name

Popular brands

Intel Desktop Board D2700MUD, Specification

Search results

Summary of Contents for Desktop Board D2700MUD

Reviews:

Related manuals for Desktop Board D2700MUD

Brands by name

Popular brands