Intel® Server D50TNP Family Integration and Service Guide
167
Figure 244. Securing the Accelerator Add-in Card in the Riser Assembly
25.
Fasten the two screws on each corner of the back side to firmly attach the accelerator add-in card to the
riser assembly.
Note
: The direction of the screws on the back side depends on whether the accelerator add-in card is in
the top slot or bottom slot of the riser assembly.
26.
Repeat
steps 16
to install other accelerator add-in cards as needed.
Figure 245. Installing the Accelerator Module Riser Assembly
27.
Install the Accelerator Module riser assembly by first aligning the captive screws to the mounting holes
on the module. Then, carefully lower the riser assembly to module (see Letter A).
28.
Fasten the captive screws to secure the Accelerator Module riser assembly to the module (see Letter B).
Flap not shown in figure