PAGE : 22
To take a picture:
1. Frame your subject in the display.
2. Touch the Shutter button to take your picture and save the image to the
Social Gallery.
NOTE:
This is the default Camera
Single mode.
To shoot a video:
1. From the Camera 2.0 app, touch the Mode button, and then select
.
2. Touch the Shutter button to begin recording. When done, press the Shutter
button again to stop recording and save the video to the Social Gallery.
Use Camera
HDR mode:
Select High Dynamic Range mode to give you pictures the most vivid colors
and richest details.
Use Camera
SmileCam mode:
In this mode, the camera will automatically snap a photo as soon as it detects
that all subjects are smiling. (The shutter button is effectively disabled.)
Use Multi
Burst mode:
When the camera is set to Burst mode, each shutter press will capture a
series of five images and save them to the Social Gallery.
Use Multi
Continuous mode:
Select the Continuous mode to sweep across a scene (horizontally or
vertically) and capture multiple images that will be automatically stitched
together into a single panoramic image. During Continuous capture, several
on-screen elements assist in capturing and aligning images:
• The arrow indicates the direction to move the camera for the next shot.
• Touch the red stop button to finish capturing multiple images.
• The counter displays the number of images that have been collected for this
panorama.
• A semi-transparent overlay of the previous image assists in aligning the next
image in the sequence. Simply move the camera until key details on the
two images are aligned, and the next image is automatically captured.
NOTE:
When using Continuous Mode, you must pan far enough to take at
least two pictures. If you do not touch the red stop button, the camera will
stop taking pictures when it reaches the maximum number of shots.
5.0 TAKING PHOTOS & VIDEOS
5 TAKING PHOTOS & VIDEOS
The Camera 2.0 app lets you take and share pictures and videos.
To start the Camera 2.0 app:
• In the App Launcher, touch
.
Camera buttons and icons
Once opened, the Camera 2.0 app displays the following icons and buttons:
Touch to switch mode: Camera, Video Multi and Panorama.
SmileCam mode will be available only in Photo mode. Selecting
a new mode changes the icon on the shutter button to match the
current mode.
Use the Shutter button to take a picture or shoot a video.
Touch to switch between rear-facing and front-facing cameras.
Touch to toggle Face Detection on/off.
Touch to adjust Flash settings.
Touch to access Picture Size, Geo Location, and Hints.
TIP:
To zoom in or out, pinch in the view window to bring up the zoom slider.
Slide the dot up to zoom in (+); slide the dot down to zoom out (-)
