Case Temperature Reference Metrology
96
Thermal and Mechanical Design Guidelines
Figure
7-24. Applying Flux to the Thermocouple Bead
15.
Cut two small pieces of solder 1/16 inch (0.065 inch / 1.5 mm) from the roll using
tweezers to hold the solder while cutting with a fine blade (Figure
Figure
7-25. Cutting Solder
16.
Place the two pieces of solder in parallel, directly over the thermocouple bead
(Figure
Summary of Contents for BX80570E8200 - Core 2 Duo 2.66 GHz Processor
