Intel BOXDP43BF Product Manual Download

Page: 69 / 78

Regulatory Compliance

Polski

Niniejszy produkt jest zgodny z postanowieniami Dyrektyw Unii Europejskiej

2004/108/EC, 206/95/EC i 2002/95/EC.

Portuguese

Este produto cumpre com as normas da Diretiva Européia 2004/108/EC,

2006/95/EC & 2002/95/EC.

Español

Este producto cumple con las normas del Directivo Europeo 2004/108/EC,

2006/95/EC & 2002/95/EC.

Slovensky

Tento produkt je v súlade s ustanoveniami európskych direktív

2004/108/EC, 2006/95/EC a 2002/95/EC.

Slovenš

ina

Izdelek je skladen z dolo

bami evropskih direktiv 2004/108/EC,

2006/95/EC in 2002/95/EC.

Svenska

Denna produkt har tillverkats i enlighet med EG-direktiv 2004/108/EC,

2006/95/EC & 2002/95/EC.

Türkçe

Bu ürün, Avrupa Birli

i’nin 2004/108/EC, 2006/95/EC ve 2002/95/EC

yönergelerine uyar.

Product Ecology Statements

The following information is provided to address worldwide product ecology concerns
and regulations.

Recycling Considerations

As part of its commitment to environmental responsibility, Intel has implemented the
Intel

Product Recycling Program to allow retail consumers of Intel’s branded products

to return used products to selected locations for proper recycling.

Please consult

http://intel.com/intel/other/ehs/product_ecology

for the details of this program, including the scope of covered products, available
locations, shipping instructions, terms and conditions, etc.

中文

作为其对环境责任之承诺的部分，英特尔已实施

Intel Product Recycling Program

（英特尔产品回收计划），以允许英特尔品牌产品的零售消费者将使用过的产品退还至指定地点作恰
当的重复使用处理。

请参考

http://intel.com/intel/other/ehs/product_ecology

了解此计划的详情，包括涉及产品之范围、回收地点、运送指导、条款和条件等。

Summary of Contents for BOXDP43BF















































































Search results

Summary of Contents for BOXDP43BF

Reviews:

Related manuals for BOXDP43BF

Brands by name

Popular brands

Intel BOXDP43BF, Product Manual

Search results

Summary of Contents for BOXDP43BF

Reviews:

Related manuals for BOXDP43BF

Brands by name

Popular brands