manualshive.com logo in svg

Intel BOXD915GVWBL - Desktop Board D915GVWBL, Manual, Page: 64 / 84

Share
Download
Intel BOXD915GVWBL - Desktop Board D915GVWBL Manual Download Page 64

Intel Desktop Board D915GVWB Technical Product Specification 

64 

 

2.15 Regulatory Compliance 

This section describes the Desktop Board’s compliance with U.S. and international safety and 
electromagnetic compatibility (EMC) regulations. 

2.15.1 Safety 

Regulations 

Table 34 lists the safety regulations the Desktop Board D915GVWB complies with when correctly 
installed in a compatible host system. 

Table 34.  Safety Regulations 

Regulation Title 

UL 60950-1:2003/ 

CSA C22.2 No. 60950-1-03 

Information Technology Equipment - Safety - Part 1:  General 
Requirements (USA and Canada)  

EN 60950-1:2002 

Information Technology Equipment - Safety - Part 1:  General 
Requirements (European Union)  

IEC 60950-1:2001, First Edition 

Information Technology Equipment - Safety - Part 1:  General 
Requirements (International)   

2.15.2 EMC 

Regulations 

Table 35 lists the EMC regulations the Desktop Board D915GVWB complies with when correctly 
installed in a compatible host system. 

Table 35.  EMC Regulations 

Regulation Title 

FCC (Class B) 

Title 47 of the Code of Federal Regulations, Parts 2 and 15, Subpart B, 
Radio Frequency Devices.  (USA) 

ICES-003 (Class B) 

Interference-Causing Equipment Standard, Digital Apparatus.  (Canada) 

EN55022:  1998 (Class B) 

Limits and methods of measurement of Radio Interference 
Characteristics of Information Technology Equipment.  (European Union) 

EN55024:  1998 

Information Technology Equipment – Immunity Characteristics Limits 
and methods of measurement.  (European Union) 

AS/NZS 3548 (Class B) 

Australian Communications Authority, Standard for Electromagnetic 
Compatibility.  (Australia and New Zealand) 

CISPR 22, 3

rd

 Edition (Class B) 

Limits and methods of measurement of Radio Disturbance 
Characteristics of Information Technology Equipment.  (International) 

CISPR 24:  1997 

Information Technology Equipment – Immunity Characteristics – Limits 
and Methods of Measurements.  (International) 

VCCI (Class B) 

Voluntary Control for Interference by Information Technology  Equipment 
(Japan) 

Summary of Contents for BOXD915GVWBL - Desktop Board D915GVWBL





















































































Reviews:

No comments