manualshive.com logo in svg

Intel BLKDX79SI, Technical Product Specification

Share
Download
Intel BLKDX79SI Technical Product Specification Download Page 28

Intel Desktop Board DX79SI Technical Product Specification 

28

 

1.11

 

Bluetooth*/WiFi Module 

The Bluetooth*/WiFi module is supplemental hardware that is included (see Figure 6). 

 

Figure 6.  Bluetooth/WiFi Module 

1.11.1

 

Bluetooth Technology 

The Bluetooth/WiFi Module enables the user to connect with a variety of Bluetooth 
enabled devices.  Driver support is provided by Microsoft operating systems like 
Microsoft Vista and Microsoft Windows 7.  The basic Bluetooth driver stack is supplied 
by Microsoft but additional features are available using the driver supplied with the 
motherboard. 

•

 

CSR Bluetooth module (BC0401PC08) 

•

 

Maximum data rate 3.0 Mb/s 

•

 

Forward and backward compatibility with Bluetooth v1.1, v1.2, v2.0, and v2.1 

•

 

Integrated antenna 

•

 

Operating system support (Windows XP, Windows Vista, and Windows 7 both 32 bit 
and 64 bit) 

 

 

For information about  

Refer to 

Obtaining Bluetooth information and drivers 

http://downloadcenter.intel.com 
http://msdn.microsoft.com/en-
us/library/aa362932(VS.85).aspx

 

Summary of Contents for BLKDX79SI



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands