Intel BLKDX79SI Technical Product Specification Download Page 16 | Manualshive

Page: 16 / 98

background image

Intel Desktop Board DX79SI Technical Product Specification

16

1.2

Legacy Considerations

This board differs from other Intel Desktop Board products, with specific changes
including (but not limited to) the following:

•

No parallel port connector

•

No floppy drive connector

•

No PS/2 connectors

1.3

Online Support

To find information about…

Visit this World Wide Web site:

Intel Desktop Board DX79SI

http://www.intel.com/products/motherboard/index.htm

Desktop Board Support

http://www.intel.com/p/en_US/support?iid=hdr+support

Available configurations for the Intel
Desktop Board DX79SI

http://ark.intel.com

Supported processors

http://processormatch.intel.com

Chipset information

http://www.intel.com/products/desktop/chipsets/index.htm

BIOS and driver updates

http://downloadcenter.intel.com

Tested memory

http://www.intel.com/support/motherboards/desktop/sb/CS-
025414.htm

Integration information

http://www.intel.com/support/go/buildit

1.4

Processor

The board is designed to support Intel Core i7 and Intel Xeon processors in an
LGA 2011 socket.
Other processors may be supported in the future. This board is designed to support
processors with a maximum wattage of 130 W with margin to allow for greater than
200 W operation. The processors listed above are only supported when falling within
the wattage requirements of the Intel Desktop Board DX79SI. See the Intel web site
listed below for the most up-to-date list of supported processors.

For information about…

Refer to:

Supported processors

http://processormatch.intel.com

CAUTION

Use only the processors listed on the web site above. Use of unsupported processors
can damage the board, the processor, and the power supply.

NOTE

This board has specific requirements for providing power to the processor. Refer to
Section 2.5.1 on page 61 for information on power supply requirements for this board.

«
...
14
15
16
17
18
...
»

Summary of Contents for BLKDX79SI



































































































Reviews:

No comments

Related manuals for BLKDX79SI

Brand: IBM Pages: 40

Brand: MSI Pages: 112

Brand: DFI Pages: 99

Brand: Texas Instruments Pages: 101

Brand: Aaeon Pages: 37

Brand: JETWAY Pages: 48

STEVAL-IME008V1

Brand: STMicroelectronics Pages: 19

Brand: Advantech Pages: 116

Brand: TOHATSU Pages: 52

Brand: EPC Pages: 10

Brand: DFI Pages: 48

Brand: Gigabyte Pages: 96

Brand: Gigabyte Pages: 19

Brand: Acconeer Pages: 14

Brand: JETWAY Pages: 57

Brand: Aaeon Pages: 44

Brand: Global American Pages: 31

Brand: Yamaha Pages: 118

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands