Intel BLKDQ43AP, Specification, Page: 20 / 90

Intel Desktop Board DQ43AP Technical Product Specification
20
• Display
⎯ Supports digital and analog displays up to 2048 x 1536 at 75 Hz refresh
(QXGA); also supports 1920 x 1080 resolution for full High Definition video
playback quality
⎯ Dual independent display support (VGA and DVI-D)
1.6.1.2 Dynamic Video Memory Technology (DVMT 5.0)
DVMT enables enhanced graphics and memory performance through highly efficient
memory utilization. DVMT ensures the most efficient use of available system memory
for maximum 2-D/3-D graphics performance. The amount of system memory
allocated to DVMT varies depending on the amount of total system memory installed
as well as the operating system being used. For Windows Vista*, a minimum of
128 MB can be allocated to DVMT and a maximum of over 2 GB can be allocated to
DVMT with the correct amount of memory installed. DVMT returns system memory
back to the operating system when the additional system memory is no longer
required by the graphics subsystem.
DVMT will always use a minimal fixed portion of system physical memory (as set in the
BIOS Setup program) for compatibility with legacy applications. An example of this
would be when using VGA graphics under DOS. Once loaded, the operating system
and graphics drivers allocate additional system memory to the graphics buffer as
needed for performing graphics functions.
NOTE
The use of DVMT requires operating system driver support.
1.6.1.3 Configuration Modes
The video modes supported by this board are based on the Extended Display
Identification Data (EDID) modes of the monitor to which the system is connected.
Standard monitors are assumed.