Intel BLKDG965RYCK Technical Product Specification Download

Page: 15 / 92

Product Description

1.2

Online Support

To find information about…

Visit this World Wide Web site:

Intel

Desktop Board DG965RY

under “Desktop Board Products” or
“Desktop Board Support”

http://www.intel.com/design/motherbd

http://support.intel.com/support/motherboards/desktop

Available configurations for the
Desktop Board DG965RY

http://developer.intel.com/design/motherbd/ry/ry_available.htm

Processor data sheets

http://www.intel.com/products/index.htm

ICH8 addressing

http://developer.intel.com/design/chipsets/datashts

Audio software and utilities

http://www.intel.com/design/motherbd

LAN software and drivers

http://www.intel.com/design/motherbd

Supported video modes

http://www.intel.com/design/motherbd/ry/ry_documentation.htm

1.3

Processor

The board is designed to support the following processors:

•

Intel Core 2 Duo processor in an LGA775 socket with a 1066 or 800 MHz
system bus

•

Intel Pentium D processor in an LGA775 processor socket with an 800 or
533 MHz system bus

•

Intel Pentium 4 processor in an LGA775 processor socket with an 800 or
533 MHz system bus

•

Intel Celeron D processor in an LGA775 processor socket with a 533 MHz
system bus

See the Intel web site listed below for the most up-to-date list of supported
processors.

For information about…

Refer to:

Supported processors

http://www.intel.com/design/motherbd/ry/ry_proc.htm

CAUTION

Use only the processors listed on web site above. Use of unsupported processors can
damage the board, the processor, and the power supply.

INTEGRATOR’S NOTE

Use only ATX12V-compliant power supplies.

For information about

Refer to

Power supply connectors

Section 2.8.2.2, page 54

Summary of Contents for BLKDG965RYCK





























































































Search results

Summary of Contents for BLKDG965RYCK

Reviews:

Related manuals for BLKDG965RYCK

Brands by name

Popular brands

Intel BLKDG965RYCK, Technical Product Specification

Search results

Summary of Contents for BLKDG965RYCK

Reviews:

Related manuals for BLKDG965RYCK

Brands by name

Popular brands