Intel AXXRSBBU8, User Manual

Page: 19 / 36

Intel
®
RAID Smart Battery AXXRSBBU8 User’s Guide 7
Installing Directly on the RAID Controller
To install the Intel
®
RAID Smart Battery AXXRSBBU8 on the RAID Controller through
the J2 board-to-board connector (daughter card), do the following:
1. Ground yourself, and remove the Intel
®
RAID Smart Battery AXXRSBBU8 from the
package.
2. Make sure the three screws, and Phillips* screwdriver are easily accessible during the
following steps.
3. Remove the protective metal cover from the battery connector on the Intel
®
RAID
Controller.
4. Align the battery for your specific RAID controller by placing the Intel
®
RAID
Controller with the components facing up (see Figure 3 ).
Figure 3. Installing Directly on the Intel
®
RAID Controller
5. Hold the controller such that the battery side is up and the three screw holes are
aligned.
6. Carefully press the Intel
®
RAID Smart Battery AXXRSBBU8 onto the RAID
controller, so that the two connectors shown above in Figure 6 are firmly joined
AF003673
Battery
A
B