Intel
®
RAID Maintenance Free Backup Unit AXXRMFBU2
User’s Guide
7
4.
Tie together the RMFBU2 Cache-offload Module cable and the data cable with a provided
strap tie as shown in Figure 6.
Figure 6. Tie Together the Cables with the Strp Tie
Note:
Please secure the cables with the strap tie to avoid unexpected RMFBU2 Cache-offload Module
cable disattaching from the RAID module during the system transportation.
5.
Install the server system cover back and connect the power cords. See your server system
documentation for instructions
Intel
®
Integrated RAID Module RMS25PB040, RMS25PB080, RMT3PB080
1.
Insert the four barrel standoffs into the matching holes in the server board. To locate the
matching module card slot on your server board, see your server board documentation. The
Intel
®
Server Board S2600IP is shown for illustrative purpose. Actual standoff hole
locations could be different (see Figure 7).
Figure 7. Installing the Barrel Standoff
2.
Attach the RAID to the matching server board connector, and press the module card firmly
to engage the barrel standoffs installed in step 1. Press down gently but firmly to ensure
that the card is properly seated in the connectors, and then insert the four pin standoffs into
the barrel standoffs respectively. The Intel
®
RAID Module RM25PB080 is shown for
illustrative purpose (see Figure 8).
