Intek M-150 Plus, Owner'S Manual, Page: 10 / 32

- 8 -
English
Frequency band selection / Programming
Frequency Band Selection / Programming
The radio must be programmed and used exclusively on a frequency band allowed in the country where the product is
used. It is possible to program a different frequency band, as per the following procedures :
1)
Switch off the radio.
2) Press and hold the UP (11) key while turning on the radio, using the OFF/VOLUME (15) knob.
3) The current programmed frequency ID code will blink on the LED display (7); during the frequency band selection
process, the frequency band ID code will blink at a faster speed.
4) Now select the desired new country code, using the UP (11) or DN (12) keys.
5) Press the DN (12) key for about 2 seconds to confirm and store the new selected frequency band ID code.
Table of Restrictions on the Use of CB Transceivers (page
I
)
The following information are to be considered only just as an indication. They are believed to be correct at the time of
printing this operating manual. It is however the user’s responsibility to check that, in the country where radio is used, the
regulations for the use of CB transceivers have not been modified. User is therefore suggested to contact the local
dealer or local authority, in order to check the current regulations for the use of CB transceivers, before operating this
product. The manufacturer does not take any responsibility if the product is used in violation of the regulations of the
country where the product is used.
Addendum (Updated information on national restrictions)
BELGIUM, UK, SPAIN, SWITZERLAND
In order to use this transceiver in Belgium, UK, Spain and Switzerland, residence must have an individual licence. Users
coming from abroad may freely use the radio in FM mode, while in order to use it in AM mode they must hold a licence
released in their own country.
ITALY
Foreigners arriving in Italy must get an Italian authorization.
AUSTRIA
Austria does not allow using multi standard programmable CB radios. It is recommended to carefully follow this
directives and not to use the product in the Austrian territory.
GERMANY
Along some border areas in Germany, the radio can not be used as a base station from channel 41 to channel 80. Refer
to local authority (notification office) for details.