Glassgate 150 Maintenance
© Integrated Design Ltd
Issue A1 August 2012
Page 4 of 15
Glass Barrier
To remove the glass barrier, first turn it fully clockwise (to the left) and look for the upper and
lower screw fixings.
Loosen the screw, but don
’t remove it. There is a custom washer within the shaft that is likely
to fall out if the screw is removed fully.
Remove the glass barrier by pushing it to the right. This will reveal the fixing shaft stubs.
The custom washer can also been seen. The lower fixing will drop out if the screw is removed
Custom Washer
held in place
with screw
