Integra Xmart OPTIMA RT10 1.5K, User Manual

Page: 13 / 28

INDEX
USER MANUAL - OPTIMA RT10 1K/1.5K/2K/3K (UL)
www.xmart-ups.com
VER.2010.22-One (ENG)
13
03
CF: FREQUENCY OUTPUT VALUE
- If CF Mode is Disabled, PAR 02 shows BAT and Initial frequency at Battery mode
can be set to:
BAT 50 = 50Hz
BAT 60 = 60Hz
- If CF Mode is Enabled, PAR 02 shows CF and Output Frequency in ONLINE mode can
be set as:
CF 50 = 50Hz
CF 60 = 60Hz
04
ECO ENABLE / DISABLE:
ENA : ENABLE
DIS : DISABLE
Factory set: DIS
Check more details at operation modes section.
05
ECO – INPUT VOLTAGE RANGE (Vac)
- Valid input VOLTAGE range for ECO mode can be configured by setting high limit
and low limit (PAR 02):
HLS: High Limit Setting (in Vac)
220V Models: HLS from +7 to +24Vac of nominal voltage (Factory set: +12Vac)
120V Models: HLS from +3 to +12Vac of nominal voltage (Factory set: +6Vac)
LLS: Low Limit Setting (in Vac)
220V Models: LLS from -7 to -24Vac of nominal voltage (Factory set: -12Vac)
120V Models: LLS from -3 to -12Vac of nominal voltage (Factory set: -6Vac)
Set values with keys:

&

06
BYPASS: ENABLE / DISABLE:
ENA : ENABLE
DIS : DISABLE
Factory set: DIS
07
BYPASS: INPUT VOLTAGE RANGE ( Set values with keys:

&

)
- Valid input VOLTAGE range for bypass mode can be configured by setting high limit
and low limit (PAR 02):
PAR 03: sets high limit (in Vac)
220V Models: HLS 230Vac – 264Vac (Factory set as 264Vac)
120V Models: HLS 120Vac – 140Vac (Factory set as 132Vac)
PAR 02: sets low limit (in Vac)
220V Models: LLS 170Vac – 220Vac (Factory set as 170Vac)
120V Models: LLS 85Vac – 115Vac (Factory set as 85Vac)
08
BYPASS: INPUT FREQUENCY RANGE
- Valid input FREQUENCY range for bypass mode can be configured by setting high
limit and low limit:
HLS: High Limit Setting (in Vac)
50Hz Models: HLS 51Hz – 55Hz (Factory set as 53Hz)
60Hz Models: HLS 61Hz – 65Hz (Factory set as 63Hz)
LLS: Low Limit Setting (in Vac)
50Hz Models: LLS 45Hz – 49Hz (Factory set as 47Hz)
60Hz Models: LLS 55Hz – 59Hz (Factory set as 57Hz)
Set values with keys:

&

09
PROG-OUTPUT: ENABLE / DISABLE PROGRAMMABLE OUTPUTS:
Enables/disables programable output (check function 11)
ENA : ENABLE
DIS : DISABLE
Factory set: DIS