60
RDV-1 US/Asia 29342995
Erasing the programmed command
from one button
You can only erase memorized commands and not
preset ones.
Press and hold down the desired
MODE button for the command,
press the SEARCH button, and then
release both buttons.
When you release the buttons, the SEND/
LEARN indicator lights.
Press and release the button for the
command you wish to erase.
When you press the button, the SEND/LEARN
indicator turns off. When you release the
button, the lamp lights again.
Press and release the same button
again.
The SEND/LEARN lamp flashes twice. The
memorized command is erased.
Note
If no button is pressed for more than 30 seconds during the
programming, the SEND/LEARN indicator flashes three times
quickly, and the remote controller exits the programming mode.
Resume from Step 1.
1
2
3
Erasing all the commands
programmed under a MODE button
Press and hold down the desired
MODE button, press the SEARCH
button twice, and then release
both buttons.
When you release the buttons, the SEND/
LEARN indicator flashes twice slowly and
then lights again.
Press and release the same MODE
button again.
When you release the button, the SEND/
LEARN indicator flashes twice slowly. This
erases all the commands memorized to the
MODE button.
Notes
• If no button is pressed for more than 30 seconds, the SEND/
LEARN indicator flashes three times quickly and the remote
controller exits the programming mode. Resume Step 1.
• If you perform an invalid operation during programming, the
SEND/LEARN indicator flashes three times quickly and the
remote controller exits the programming mode. Resume from
Step 1.
• If many commands have been programmed to the MODE
button, then the SEND/LEARN indicator may remain lit for some
time during Step 2. This is not a malfunction.
1
2
RDV-1(US_E)p56-60.p65
10/4/00, 17:06
60