Connections
En-15
Connecting a Power Amplifier
If you want to use a more powerful power amplifier, you
can use the AV receiver as a preamp. Connect all speaker
outputs to the power amplifier. See the manuals supplied
with your amplifier for details.
SB
···Surround Back,
FH
···Front High,
FW
···Front Wide
Note
*1
Specify “
None
” for any channel that you don’t want to output
(
➔
page 58
).
*2
When connecting to the
SB/FH/FW EXT AMP
jacks, you
must set the “
Preout to External Amplifier
” setting
(
➔
page 58
).
Using Speakers Without Crossover Network
Connecting speakers without crossover network provide a
fine, three-dimensional sound field that extends bass and
treble performance to the fullest extent. When speakers
without crossover network are used, the AV receiver is
able to drive up to a 5.1 speaker system in the main room.
You must enable “
Digital Crossover
” in “
Speaker Type
(Front)
” (
➔
page 58
) and make the settings of “
Digital
Processing Crossover Network
” (
➔
page 62
).
Note
• You need to make the setting before connecting the speakers.
L
R
Power amplifier
*1
*2
Important:
• Speakers without crossover network are speakers with no
built-in crossover network.
• With speakers without crossover network, be careful
NOT
to
connect tweeters and woofers the wrong way around, as this
may damage your speakers.
• With speakers without crossover network, be careful
NOT
to
set “
Speaker Type (Front)
” to “
Bi-Amp
” as this may damage
your speakers. Make sure that this setting is set to “
Digital
Crossover
”.
• Confirm that your speakers are without crossover network by
referring to your speaker manual.
Woofer (low)
Tweeter (high)
Front right
Front left
