Others
En-22
Specifications
Amplifier Section
Rated Output Power (North American)
With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 110
watts per channel minimum RMS power, with no more than 0�08% total
harmonic distortion from 250 milliwatts to rated output�
Surround Mode Output Power (
)
(6 ohms, 1 kHz THD 0�9%) 175 W per channel
¼
Reference output for each speakers�
Depending on the source and the listening mode settings,
there may be no sound output�
Rated Output Power (Others)
7 ch × 175 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC)
Dynamic Power (
)
¼
IEC60268-Short-term maximum output power
250 W (3 Ω, Front)
220 W (4 Ω, Front)
130 W (8 Ω, Front)
THD+N (Total Harmonic DisNoise)
0�08% (20 Hz - 20 kHz, half power)
Input Sensitivity and Impedance
200 mV/47 kΩ (LINE, 1 kHz 100 W/8 Ω)
3.5 mV/47 kΩ (PHONO MM)
Rated RCA Output Level and Impedance
1
V/470 Ω (PRE OUT)
1
V/470 Ω (SUBWOOFER PRE OUT)
100 mV/2.3 kΩ (ZONE2 LINE OUT)
1
V/2.3 kΩ (ZONE2 PRE OUT)
Phono Overload
70 mV (MM 1 kHz 0�5% Direct)
Frequency Response
5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode)
Tone Control Characteristics
±10 dB, 20 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
106 dB (LINE, IHF-A)
80 dB (PHONO MM, IHF-A)
Speaker Impedance
4 Ω - 16 Ω or 6 Ω - 16 Ω
Video Section
Signal Level
1.0 Vp-p/75 Ω (Component Y)
0.7 Vp-p/75 Ω (Component Pb/Cb, Pr/Cr)
1.0 Vp-p/75 Ω (Composite)
Correspoinding maximum resolution
480i/576i (Component)
Tuner Section
FM Tuning Frequency Range
87�5 MHz - 107�9 MHz (North American)
87�5 MHz - 108�0 MHz, RDS (Others)
AM Tuning Frequency Range
522/530 kHz - 1611/1710 kHz
Preset Channel
40
Network Section
Ethernet LAN
10BASE-T/100BASE-TX
General
Power Supply
AC 120 V, 60 Hz (North American)
AC 220 - 240 V, 50/60 Hz (Others)
Power Consumption
6�9 A (North American)
710 W (Others)
0�1 W (Stand-by, North American)
0�15 W (Stand-by, Others)
2�6 W (Network Standby)
80 W (No-sound)
Dimensions (W × H × D)
435 mm × 174 mm × 376 mm
17-1/8" × 6-7/8" × 14-13/16"
Weight
11�5 kg (25�4 lbs�)
●
HDMI
Input
IN1 (BD/DVD, HDCP2�2), IN2 (CBL/SAT, HDCP2�2), IN3 (STRM BOX,
HDCP2�2), IN4 (PC), IN5 (GAME), IN6, IN7, AUX INPUT HDMI (front)
Output
OUT MAIN (ARC), OUT SUB
Video Resolution
4K 60 Hz (RGB/YCbCr4:4:4/YCbCr4:2:2, 24 bit)
Audio Format
Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS:X,
DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS-
ES, DTS, DTS Express, DSD, Multichannel PCM (up to 8ch)
Supported
3D, Audio Return Channel, Deep Color, x�v�Color™, LipSync, CEC,
4K, Extended Colorimetry (sYCC601, Adobe RGB, Adobe YCC601),
Content Type, 3D Dual View, 21:9 Aspect Ratio Video Format
●
HDBaseT
OUT (
)/IN (HDMI)
¼
3G bps or less for 4K (use a CAT 5e or better cable, 70 m or less in length)
●
Video Inputs
Component
IN1 (BD/DVD), IN2 (GAME)
Composite
IN1 (CBL/SAT), IN2 (STRM BOX), IN3 (PC)
●
Audio Inputs
Digital
OPTICAL 1 (CD), 2 (TV)
COAXIAL (BD/DVD)
Analog
BD/DVD, CBL/SAT, STRM BOX, PC, GAME, TV, CD, PHONO
●
Audio Outputs
Analog
ZONE2 PRE/LINE OUT
PRE OUT (FRONT L/R, CENTER, SURROUND L/R, BACK or HEIGHT
L/R, 2 SUBWOOFER)
Speaker Outputs
FRONT L/R, CENTER, SURROUND L/R, BACK or HEIGHT or Bi-AMP
L/R, ZONE2 L/R
Phones
PHONES (Front, ø 6�3)
●
Others
Setup Mic
1 (Front)
RS232 1
RI REMOTE CONTROL 1
USB
1 (Ver�1�1, 5 V/1 A)
Ethernet 1
IR IN 2 (A/B)/IR OUT
1
12V TRIGGER OUT 3 (A: 100 mA, B: 25 mA, C: 25 mA)
Supports multi-language on-screen display
(North American) English, German, French, Spanish, Italian, Dutch,
Swedish, Chinese (
)
(Others) English, German, French, Spanish, Italian, Dutch, Swedish,
Russian, Chinese (
)
¼
OSD is not displayed when the input selector is "NET"� Use the
display on the main unit when operating the unit�
Specifications and features are subject to change without notice�
Summary of Contents for DTR-40.7
Page 31: ...En 31...