Integra DTR-40.5, Instruction Manual

Page: 81 / 104

Controlling Other Components
En-81
By pressing the Remote Mode button that’s been
programmed with the remote control code for your
component, you can control your component as
described below.
For details on entering a remote control code for other
components, see “Entering Remote Control Codes”
(
➔
page 79 ).
Controlling a TV
TV is preprogrammed with the remote control code
for controlling a TV that supports the p
*1
(limited to some models). The TV must be able to
receive remote control commands via
p and
be connected to the AV receiver via HDMI. If
controlling your TV via
p
doesn’t work very
well, program your TV’s remote control code into TV
and use the TV remote mode to control your TV.
Use the following remote control codes:
`
11807/13100/13500 :
TV with p
Controlling Apple TV
By programming the supplied remote controller with
the appropriate remote control code, you can use it to
operate your Apple TV.
Use the following remote control codes:
`
02615 :
Apple TV
Controlling MHL-Enabled Mobile Device
By programming the supplied remote controller with
the appropriate remote control code, you can use it to
operate your MHL-enabled mobile device.
Connect your MHL-enabled mobile device to the
AUX
Input MHL jack. We advise you to program the
remote control code on the AUX button.
Use the following remote control codes:
(North American models)
`
33101 :
MHL-enabled mobile device
(Australian models)
`
32910 :
MHL-enabled mobile device
Note
• With some mobile devices, reliable operation cannot be
guaranteed.
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player or DVD Recorder
BD/DVD is preprogrammed with the remote control
code for controlling a component that supports the
p
*1
(limited to some models). The component
must be able to receive remote control commands via
p
and be connected to the AV receiver via
HDMI.
Use the following remote control codes:
`
32910/33101/33501/31612 :
Blu-ray Disc/DVD player with
p
*1 The p supported by the AV receiver is the CEC
system control function of the HDMI standard.
Controlling Other Components
h
l
m
n
o
k
j
g
c
b
d
a
e
f
i
Press the appropriate
Remote Mode button first.