Integra DTR-40.5, Instruction Manual

Page: 65 / 104

Advanced Operations
En-65
Operating
procedure
(
➔
page 55 )
Note
• This setting is not available in either of the following cases:
– The “ Audio TV Out (Main) ” setting is set to “ On ”
(
➔
page 71 ) or “ Audio TV Out (Sub) ” setting is set to
“ On ” (
➔
page 71 ) and you’re listening through your TV
speakers.
– “ HDMI CEC (RIHD) ” is set to “ On ” (
➔
page 70 ) and
you’re listening through your TV speakers.
• A/V Sync is disabled when the Direct listening mode is used
with an analog input source.
• This setting cannot be used with the “ NET ”, “ USB ” and
“ BLUETOOTH ” input selectors.
Name Edit
You can enter a custom name for each individual
input selector and radio preset for easy identification.
When entered, the custom name will appear on the
display.
The custom name is edited using the keyboard
screen.
■
Name
a Toggles between lower and upper case
characters.
*1
b
Moves the cursor left or right in the Name input
area.
c
Moves the cursor backward and deletes one
character.
*2
d
Enters a space character.
e
Confirms your entry.
Tip
• To name a radio preset, use Tuner to select AM or FM, and
then select the preset (
➔
page 37 ).
• To restore a name to its default, erase all characters with
CLR , select “ OK ” and then press Enter .
*1 This can also be performed by using +10 on the remote
controller.
*2 Press CLR on the remote controller to delete all the
characters you have input.
Note
• This setting cannot be used for the “ NET ”, “ USB ” and
“ BLUETOOTH ” input selectors.
Picture Adjust
Using Picture Adjust, you can adjust the picture
quality and reduce any noise appearing on the screen.
Press
Enter to view the TV picture while setting when
the video source is output to HDMI OUT MAIN . To
return to the previous screen, press Return .
■
Wide Mode
*1*6
This setting determines the aspect ratio.
`
4:3 :
`
Full :
`
Zoom :
`
Wide Zoom :
`
Auto :
According to the input signals and monitor
output setting, the AV receiver automatically
selects the aspect ratio. See “Monitor Out” for
details on the monitor output setting
(
➔
page 56 ).
1
Use q / w / e / r to select a character, and then
press Enter.
Repeat this step to enter up to 10 characters.
2 To store a name when you’re done, be sure to
select “OK” by using
q
/
w
/
e
/
r
, and then press
Enter.
BD/DVD 4 - 4. Name Edit
Name
+10 CLR
a b c d e f g h i j k l m
n o p q r s t u v w x y z
1 2 3 4 5 6 7 8 9 0 – ^ \
Space
Back Space Shift OK
, . / ; : @ [ ]
Shift All Erase
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
+ ? ` { } < >
! ˝ # $ % & ’
) ( _ = | ˜
Shift All Erase +10 CLR
Space
Back Space Shift OK
a e b d c
Name input area
*1 *2