background image

35

 

Specifications

 

Advanced Setup

 

Listening Modes

 

Network Functions

 

> Basic Manual

|

Troubleshooting

Supplementary Information, etc.

7. Multi Zone

Make settings related to Multi-zone Connection, such as the volume for the separate room.

 

1. Zone 2

Setting Item

Default Value

Setting Details

Output Level

Fixed

Select whether to adjust the volume on the pre-

main amplifier in the separate room or on this unit 

when outputting to Zone 2.

"Fixed": Adjust on the pre-main amplifier in the 

separate room

"Variable": Adjust on this unit

Maximum Volume Off

Set the maximum value for Zone 2 to avoid too 

high volume. Select a value from "Off", "50" to 

"99". (When "3. Audio Adjust" - "Volume" - "Volume 

Display" is set to "Absolute")

Power On Volume Last

Set the Zone 2 volume level of when this unit is 

turned on. Select a value from "Last" (Volume level 

when the unit was turned off), "Min", "0.5" to "99.5" 

and "Max". (When "3. Audio Adjust" - "Volume" - 

"Volume Display" is set to "Absolute")

• 

You cannot set a higher value than that of 

"Maximum Volume".

 

2. Zone 3

Setting Item

Default Value

Setting Details

Output Level

Fixed

Select whether to adjust the volume on the pre-

main amplifier in the separate room or on this unit 

when outputting to Zone 3.

"Fixed": Adjust on the pre-main amplifier in the 

separate room

"Variable": Adjust on this unit

Maximum Volume Off

Set the maximum value for Zone 3 to avoid too 

high volume. Select a value from "Off", "50" to 

"99". (When "3. Audio Adjust" - "Volume" - "Volume 

Display" is set to "Absolute")

Setting Item

Default Value

Setting Details

Power On Volume Last

Set the Zone 3 volume level of when this unit is 

turned on. Select a value from "Last" (Volume level 

when the unit was turned off), "Min", "0.5" to "99.5" 

and "Max". (When "3. Audio Adjust" - "Volume" - 

"Volume Display" is set to "Absolute")

• 

You cannot set a higher value than that of 

"Maximum Volume".

 

3. Remote Play Zone

Setting Item

Default Value

Setting Details

Remote Play 

Zone

Auto

When playing using AirPlay or Spotify Connect, 

or when using the Music Server feature to play 

remotely from your PC, you can set whether to 

play in the main room (where this unit is) or in a 

separate room (Zone 2/Zone 3).

"Auto": When the main room input selector is 

NET, music is played in the main room. When the 

separate room input selector is NET and the main 

room is other than NET, then the music is played in 

the separate room.

"Main", "Zone 2", "Zone 3": Select when limiting the 

play zone to a particular room. For example, when 

playing only in the separate room, select "Zone 2" 

or "Zone 3".

• 

This feature may not work if something is 

already being played with the same network 

feature.

Summary of Contents for DRC-R1.1




















































































































Reviews: