31
En
> Install
> Playback
Troubleshooting | Supplementary Information, etc.
∫
Presetting a Radio Station
It allows you to register up to 40 of your
favorite AM/FM radio stations.
Registration Procedure
After tuning into the AM/FM radio station
you want to register, perform the following
procedure.
1. Press Memory (d) on the remote
controller so that the preset number on
the display flashes.
2. While the preset number is flashing
(about 8 seconds), repeatedly press the
cursors
/
(b) on the remote
controller to select a number between 1
and 40.
3. Press Memory again on the remote
controller to register the station.
When registered, the preset number
stops flashing. Repeat this procedure for
all of your favorite AM/FM radio stations.
Selecting a Preset Radio Station
1. Press Tuner (a) on the remote controller.
2. Press the cursors
/
(b) on the
remote controller to select a preset
number.
Deleting a Preset Radio Station
1. Press Tuner (a) on the remote controller.
2. Press the cursors
/
(b) on the
remote controller to select the preset
number to delete.
3. After pressing Memory (d) on the remote
controller, press Clear (c) while the
preset number is flashing to delete the
preset number. When deleted, the
number on the display goes off.
1
2
3
∫
Using RDS (Australian
models)
RDS stands for Radio Data System and is
a method of transmitting data in FM radio
signals. In regions using RDS, the radio
station name is displayed when you tune
into a radio station broadcasting program
information. When you press
on the
remote controller in this state, you can use
the following functions.
Display Text Information (Radio
Text)
1. While the name of the station is being
displayed on the display, press
on the
remote controller once.
Radio Text (RT) broadcast by the station
is displayed scrolling across the display.
"No Text Data" is displayed when no text
information is available.
Search for Stations by Program
Type
1. While the name of the station is being
displayed on the display, press
on the
remote controller twice.
2. Press the cursors
/
on the remote
controller to select the Program Type
you want to find, then press Enter to
start the search.
0
The Program Types displayed are as
follows: None / News (News reports) /
Affairs (Current affairs) / Info
(Information) / Sport / Educate
(Education) / Drama / Culture /
Science (Science and technology) /
Varied / Pop M (Pop music) / Rock M
(Rock music) / Easy M (Middle of the
road music) / Light M (Light classics) /
Classics (Serious classics) / Other M
(Other music) / Weather / Finance /
Children (Children’s programmes) /
Social (Social affairs) / Religion /
Phone In / Travel / Leisure / Jazz
(Jazz music) / Country (Country
music) / Nation M (National music) /
Oldies (Oldies music) / Folk M (Folk
music) / Document (Documentary)
0
The information displayed may
sometimes not match the content
being broadcast by the station.
3. When a station is found, the station
flashes on the display. Press Enter while
this is happening to start receiving that
station. If you don't press Enter, the unit
continues to search for another station.
0
If no stations are found, the message
"Not Found" is displayed.
0
Unusual characters may be displayed
when the unit receives unsupported
characters. However, this is not a
malfunction. Also, if the signal from a
station is weak, information may not be
displayed.
