Integra DLV-100, Service Manual

Page: 41 / 48

METHOD OF DISASSEMBLY
10. OPTICAL ENGINE ASSY
(1) Remove the one screw
1
and the two screws
2
,
and take out the WHEEL SENSOR BOARD ASSY
and WHEEL COVER.
(2) Remove the one screw
3
, and take out the
COLOR WHEEL and RUBBER SHEET.
(3) Remove the three screws
4
and take out the
LIGHT TUNNEL ASSY.
(4) Remove the three screws
5
and take out the LENS
UNIT.
(5) Remove the one screw
6
and take out the MIR-
ROR ASSY.
(6) Remove the one screw
7
and take out the APER-
TURE/LENS BASE COVER.
(7) Remove the one screw
8
and take out the CYL-
INDER MIRROR ASSY.
(8) Remove the two screws
9
, and take out the HEAT
SINK A and HEAT SINK B.
(9) Remove the four screws
0 1
, and take out the
FORMATTER BOARD, FORMATTER BRACKET,
ELASTOMER HOLDER, ELASTOMER, and DMD.
1
2
2
4
4
5
5
6
WHEEL SENSOR BOARD ASSY
LIGHT TUNNEL
ASSY
INSULATE
SHEET
LB-U
LENS UNIT
POINT RING COVER
MIRROR
ASSY
CYLINDER
MIRROR ASSY
7
LENS
BASE
APERTURE
8
3
LENS BASE
COVER
DMD
ELASTOMER
ELASTOMER
HOLDER
RUBBER SHEET
COLOR WHEEL
WHEEL COVER
HEAT SINK A
HEAT SINK B
9
10
FORMATTER BRACKET
FORMATTER BOARD
DLV-100