14
EN
CONNECTIONS
Connection to the TV
• Make one of the following connections, depending on the capabilities of your existing device.
AUDIO IN
L
R
VIDEO
IN
HDMI IN
and
or
or
*
1, 2
TV
this unit
standard audio
RCA
audio cable
AUDIO CONNECTION
AUDIO / VIDEO
CONNECTION
HDMI
cable
best audio / picture
Method 3
VIDEO CONNECTION
RCA
video
cable
Method 1
standard picture
better picture
HDMI OUT
VIDEO OUTPUT
(COMPONENT)
Method 2
*
1
COMPONENT
VIDEO IN
Y
P
B
P
R
RCA component
video cable
(Red)
(Blue)
(Green)
(Red)
(Blue) (Green)
VIDEO OUTPUT
(VIDEO)
AUDIO OUTPUT
(DOWN MIX L / R)
*
1
This unit is compatible with the progressive scan system. The feature provides you with the higher quality pictures
than traditional output system does. To utilize this feature, a component or an HDMI connection is required. Refer
to “HDMI Video Resolution” or “Component Output” setting on page 43 to set the video resolution.
*
2
- Analog audio connection is not required for this connection.
- High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility.
- Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.
Supplied cables used in this connection are as follows:
• RCA audio cable (L / R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be
distorted due to the copy-protection system.
• If the picture is not output properly to the TV because of “HDMI Video Resolution” or “Component Output” setting,
V
press and hold
[Play
B
]
on the front panel for more than 5 seconds. “HDMI Video Resolution” and “Component
Output” setting will be reset to the default automatically. You cannot change the video resolution during Blu-ray
Disc playback. To change the resolution, stop playback.
• A simple 1-cable connection with a device having an HDMI (High-Definition Multimedia Interface) jack allows
digital transfer of both digital video signals and multi-channel audio signals.
E5SF0UD̲DBS50.2̲EN̲v2.indd 14
E5SF0UD̲DBS50.2̲EN̲v2.indd 14
2010/08/05 15:16:31
2010/08/05 15:16:31
