AMBUS® Link
18
6.2 Operation via AMBUS
®
Link
COMMENT
The delivery state of the network configuration ex works
•
DHCP is activated, IP address is automatically obtained
•
DHCP is deactivated by manual entry of the network parameters
o
Activating DHCP by entering zeros for all network parameters
COMMENT
Functionality of the secondary search
•
The search via secondary address is conducted as reverse search
6.2.1. Quick commissioning M-Bus network
1. Hold the
button for more than 5 sec.
2. M-Bus meter search is started via
secondary address
3. The reading and scanning LEDs are glow-
ing "brightly"
4. The operating mode reports SCAN
5. Scanned meters are shown on the
display (slaves)
All meters have been read in
COMMENT
Finalising the quick configuration of the network parameters
•
The set parameters are activated after the configuration has been
finished
•
The configuration is finished after de-selecting the last digit
