20 |
P a g e
Ezeio v9 - 120317
Activating GSM sims in the Ezeio Controller :
1. Obtain a data GSM sims with no password.
2. Place sims in a mobile phone to activate as per the providers instructions.
3. Place the sims in the Ezeio Controller with the chisel edge of the sims at the top :
.
The Ezeio Controller must be plugged into the local Ethernet with access to the internet.
Log into the Ezeio Configuration area, click on
“System”.
Each provider has a special word that must be typed in as explained below :
Note : to get the Ezeio communicating on the simms after setting up with TCP connected,
requires the
power to be turned off/on
for a connection to be re-established via the simms card.
Setting required for Vodafone New Zealand
Connect via Ethernet after changing the SIM over.
Changed the APN setting to
vodafone
Reboot after removing Ethernet cable.
Telecom
: Steps:
Connect via Ethernet after changing the SIM over.
Changed the APN setting to
internet
Reboot after removing Ethernet cable.
2degrees
: Steps:
Connect via Ethernet after changing the SIM over.
Changed the APN setting to
internet
Reboot after removing Ethernet cable.
