6
INSTALLATION AND MAINTENANCE
INSTRUCTIONS
A COPY OF THESE INSTRUCTIONS SHOULD BE LEFT WITH THE EQUIPMENT UNTIL
INSTALLATION BY ALL TRADES IS FULLY COMPLETE. FOLLOWING FINAL
INSPECTION, A COPY SHOULD BE LEFT WITH THE OWNER/USER.
SM-501-N
Ionization Type, 4-Wire Duct Smoke Detector
SM-501-P
Photoelectric Type, 4-Wire Duct Smoke Detector
MSR- SERIES REMOTE ACCESSORIES
Visual Indicators: Alarm, Pilot, Trouble
Buzzer: Programmable for Alarm and Trouble
Buzzer Silence: Visual Notification and Ringback
Detector Test/Reset: Key Operated
LED/Buzzer Test: Push-Button Operated
MSR-100R/W
White Face Plate
MSR-100R/R
Red Face Plate
MSR-100R/S
Stainless Steel Face Plate
MSR-100RS/W/C
White Face Plate; Strobe with Clear Lens
MSR-100RS/W/O
White Face Plate; Strobe with Opaque Lens
MSR-100RS/R/C
Red Face Plate; Strobe with Clear Lens
MSR-100RS/R/O
Red Face Plate; Strobe with Opaque Lens
MSR-100RS/S/C
Stainless S t eel Face Plate; Strobe with Clear Lens
MSR-100RS/S/O
Stainless Steel Face Plate; Strobe with Opaque Lens
MS- and SHP- SERIES REMOTE ACCESSORIES
MS-RA
Remote Alarm
MS-RA/R
Remote Alarm, push button Test/Reset Switch
MS-RA/P/R
Remote Alarm, Pilot, push-button Test/Reset Switch
MS-KA/R
Remote Alarm, key-operated Test/Switch
MS-KA/P/R
Remote Alarm, Pilot, key-operated Test/Reset Switch
MS-RA/P
Remote Alarm, Pilot
MS-RH
Remote Alarm Horn
MS-RH/KA/P/R
Remote Alarm, Pilot, Horn, key-operated Test/Reset Switch
MS-RH/P/A
Remote Alarm, Pilot, Horn
MS-RH/KA/P/A/T
Remote Alarm, Trouble, Pilot, Horn, key-operated Test/Reset Switch
MS-RA/P/T
Remote Pilot, Trouble
MS-RA/FT/P
Remote Pilot, Trouble, push-button Test/Reset Switch
MS-KA/P/R/T
Remote Pilot, Trouble, key-operated Test/Reset Switch
MS-RD
Remote Alarm
MS-F/T
Remote Trouble
SMOKE TEST GAS
TG-1000 Solo Aerosol Test Gas
SAMPLING TUBES
STS-1.0
For duct widths of 6” TO 1.0’
STS-2.5
For duct widths of 1.0’ TO 3.0’
STS-5.0
For duct widths of 3.0’ TO 5.0’
STS-10.0
For duct widths of 5.0’ TO 10.0’
FAST Tube
Sectional Tube for use in ducts up to 8ft wide
WEATHERPROOF ENCLOSURES
WP-1 Weatherproof Enclosure
REPLACEMENT SMOKE DETECTOR HEADS
55000-225
S65 Ionization Detector Replacement Head
55000-328
S65 Photoelectric Detector Replacement Head
POWER SUPPLIES
T-PB 202-1
24VAC @ 4.0A Class I Power Supply
T-PB 202-0
24VAC @ 4.0A Class I Power Supply
T-PB 303-1
24VAC @ 3.0A Class II Power Supply
T-PB 303-0
24VAC @ 3.0A Class II Power Supply
NOTICE:
The information contained in this document is the most current available at the time of shipment of accompanying product, and is subject to
change without notice. Future references should always be made to the most current revision of this document. The information contained in all this
document should be considered before installing or using the product. Any example applications shown are subject to the most current enforced local/
national codes, standards, approvals, certifications, and/or the authority having jurisdiction. All of these resources, as well as the specific manufacturer
of any shown or mentioned related equipment, should be consulted prior to any implementation. For further information or assistance concerning this
product, contact us. Specifications subject to change any and all documentation without notice.
SM-501 SERIES
DUCT SMOKE DETECTORS
AVAILABLE ACCESSORIES FOR USE WITH
SM-501 SERIES DUCT SMOKE DETECTORS
Specifications subject to change without notice. | INST APD0191 D140113 | USA 150303 | Page 1 of 7
12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.IN
TEC
| relevantsolutions.com/inteccontrols
SM-501 – Installation
