background image

© INTEC Video Systems, Inc.  

Revision F May 2013

 

6

Description 

Product Overview 

The CVC500AH series cameras are designed to be 
waterproof and are rated to IP68 against water 
intrusion. They have also been designed to operate 
in a variety of mobile applications.  
 

Features 

- IP68 

Waterproof 

Wide Field of View provides operator with 
great visibility for faster response to hazards 

Crisp Color Imaging provides a clear, 
detailed picture to the driver with the lowest 
light sensitivity of any color camera 

One-Way Audio allows the driver to hear 
activity around the vehicle 

- Standard 

thermostatically controlled heater 

feature helps melt away snow, ice and frost  
from the camera and allow cold weather 
operation 

- Easily 

flush 

mountable 

 

Specifications 

 

Pick Up Element: 

1/3” CCD

 

 

Pixel Count: 

510 (H) x 492 (V)

 

(250,920 total pixels) 

 

Lens:

 2.2mm f2.0 auto iris

 

 

Minimum Illumination: 

0.5 lux (0.05 ft candles) 

 

Resolution

: 330+ lines (H) x 350+ lines (V) 

 

Field of View

: 123° (H) x 91° (V) 

 

Shock and Vibration

: 9G @ 0-2000 cpm 

 
Weight: 

0.66 lbs.

 

 

Dimensions:  

CVC500AH

  

(with mounting bracket)

  

W 3.85" x H 2.96" x D 2.57"

 

(without mounting bracket)

  

W

 

3.19" x H 1.91" x D 2.33" 

 

CVC500AHXL 
(with mounting bracket)

  

W 3.85" x H 4.13" x D 2.62"

 

(without mounting bracket)

  

W

 

3.19" x H 1.91" x D 2.48" 

 

Operating Conditions:

 All weather operation

 

 

Color: 

Metallic Silver 

 

Options:

 Flush Mount

 

 

Warranty:

 CVC500AH - Five years parts & labor 

 

     CVC500AHXL – Six years parts & labor  

 
Extended warranty available at time of purchase or 
anytime during the original warranty period. 
 
 

Specifications Subject to Change Without Prior 
Notice. 

Summary of Contents for CVC500AH Series
















Reviews: