Intec ColorCut FB1150 Series, Installation & Setup Manual

Page: 21 / 44

Intec Printing Solutions - Manual for ColorCut flat bed series FB550 ..................................................................................... Page No: 21
3.1 Assembly of the Stand and Connecting the Vacuum Pump (cont)
Assembly of vacuum fan/pump
Locate one side panel, both
cross members and Bolts Using the black bolts to
attach the cross members. Then attach the other side
panel using same method.
Screw the stand feet into
the bottom of side panels Remove the Rubber feet
from the base of Flatbed. Locate the Flatbed on the
stand and fix with bolts.
Tighten all bolts with Allen
key supplied.
Connect vacuum hose
(FB550 use supplied connectors)
Assembly of stand
The assembled unit
Attach Silencer
(Optional for FB550 models)