INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com
Specifications subject to change without notice. | GAGC06_E_0516 | USA 200303 | Page 14 of 41
DGC6 – UserManual
Symbol Description
Default Function
DX
Measured value
Measured value from bus sensor with SP address with X = 1 - 96
AX
Measured value
Measured value from analog sensor at analog input with AX = 1 - 32
CO
Gas type
See 4.7.3
ppm
Gas unit
See 4.7.3
A
Average value
Arithmetic average (30 measured values within the time unit)
C
Current value
Current value of gas concentration
S!
Alarm
SP has triggered an alarm
#
Maint. info
Device has exceeded maintenance date
?
ConfigError
SP configuration not compatible
Error
Fault SP
Communication error, or signal out of the measuring range
Locked
SP locked
SP was temporarily locked by the operator.
The information ConfigError has priority to maintenance information.
Alarm information is always displayed with “!”, even if ConfigError or maintenance information are active.
