background image

© Intatec Ltd 2014

5

Maintenance

   

Aftercare

   Inta electronic taps have a high quality finish and should be treated with care.

   An occasional wipe with a mild detergent on a soft damp cloth followed by a thorough rinse 
   and wipe dry with a soft clean cloth is all that is required.

   

Do not use an abrasive or chemical household cleaner as this may cause 

   damage to the surfaces.

   

When cleaning bathroom tiles the tap should be protected from any splattering of harsh 

   cleaners.

Warranty

   Limited Warranty

   

This product is covered by a limited warranty for one year from the date of purchase.

   During this period Intatec Ltd undertakes, at its option, to repair or replace any faults caused by
   defective material or manufacturing faults that may arise (see Intatec Warranty).

   This guarantee does not cover faults or damage caused by incorrect installation and/or 
   maintenance, wear and tear, battery or water composition (eg hard water), this includes but is 
   not limited to the following:

   •    Incorrect installation, inversion of supply pipes.

   •    Pressure or temperatures exceeding the recommended limits.

   •    Improper use, tampering, bad or lapsed maintenance.

   •    Foreign bodies, dirt or scale introduced by the water supply.

Please Leave this Manual for the User

Summary of Contents for IR120CP









Reviews: