INSYS Powerline GP
Function
33
•
Reading out the status information
How to read out the status information of a INSYS Powerline GP.
The MAC address of the device is known (here: 00:05:B6:03:2E:DE).
The Ethernet network interface to which the device is connected is known
(here: 2). If it is not known, it can be worked out by trial and error.
1.
Enter the command into the command line as follows.
C:\>
plctool -afI
–
i2 00:05:B6:03:2E:DE
nic2 00:05:B6:03:2E:DE Fetch Device Attributes
nic2 00:05:B6:03:2E:DE QCA7000-MAC-QCA7000-1.1.0.727-02-20130826-FINAL (1mb)
nic2 00:05:B6:03:2E:DE Fetch NVRAM Configuration
nic2 00:05:B6:03:2E:DE TYPE=0x1520 (M25P16) PAGE=0x0100 (256) BLOCK=0x10000
(65536) SIZE=0x200000 (2097152)
PIB 0-0 8080 bytes
MAC 00:05:B6:03:2E:DE
DAK 92:C1:32:71:E4:B5:EC:68:2D:FB:BD:25:4E:A7:37:77
NMK 41:49:AD:59:AD:CB:7C:01:93:11:69:0E:64:8E:AC:65
NID 48:E0:F7:C5:53:7D:07
NET Qualcomm Atheros Enabled Network
MFG Qualcomm Atheros HomePlug AV Device
USR evse_pilot_3
CCo Always
MDU N/A
The status information of the device will be shown.
•
Reading out the PIB file
How to read out the PIB file from a device and store it under the name
"old.pib".
The MAC address of the device is known (here: 00:05:B6:03:2E:DE).
The Ethernet network interface to which the device is connected is known
(here: 2).
1.
Enter the command into the command line as follows.
C:\>
plctool -p old.pib
–
i2 00:05:B6:03:2E:DE
nic2 00:05:B6:03:2E:DE Read Module from Memory
The PIB file will be stored under the name specified.
