Technical Data
INSYS ADSL 1.0
5
Technical Data
5.1
Physical Features
All specified data was measured with nominal input voltage, at full load, and an
ambient temperature of 25°C. The limit value tolerances are subject to the usual
variations.
Physical Feature
Value
Operating voltage
minimum 10 V DC
maximum 60 V DC
Power consumption
approx. 3.5 W
Reset input level
HIGH level = 3-12 V (contact open or
voltage strength for external supply)
LOW level = 0-1 V
Current consumption of the active
reset input against GND (internal 3.3 V)
Typically 0.35 mA (when enabling the
input by connecting to GND)
Weight
190 g
Dimensions (Width x Depth x Height)
55 mm x 110 mm x 75 mm
Temperature range
-20 °C – 55 °C
Maximum permissible humidity
95% non-condensing
IP rating
Housing IP40, Terminals IP20
Table 1: Physical Features
5.2
Technological Features
Technological Feature
Description
Supported Standards
ADSL/ADSL2/ADSL2+ (G.992.1, G.992.2,
T1.413, G992.3, G.992.5) with optimised
AFE (Analogue Front End) designed to
meet ADSL (TR-067) and ADSL2+ (TR-
100) requirements
LLC encapsulation according to RFC1483
Ethernet port
10/100 Mbit/s full/half duplex auto sense;
automatic detection of "crossover" or
"patch" wiring; dying gasp.
Table 2: Technological Features
16
