7
Global Modes
To switch between
Quantiser Mode
and
Performance Mode
, press and
hold the
Transpose Button
and then
tap the
Diatonic Button
.
Inversion
,
Voicing
,
Chord Quality
,
and
Transpose
controls are available
in both modes.
Quantiser Mode:
The default behavior of the
harmonàig
is as a
harmonising quantiser. In
Quantiser Mode
, a single control voltage
signal present at the
CV Input
will be quantised and output from the
R CV Output
. The control voltage is then duplicated and offset at
calibrated intervals and generated from the
3 CV Output
,
5 CV Output
,
and
7 CV Output
. The offsets are dependent on the
Chord Quality
,
Inversion
,
Voicing
, and
Transpose
parameters and vary on a per
output basis.
Performance Mode:
The secondary behavior of the
harmonàig
is
as a harmonising performance keyboard. In
Performance Mode
,
the
Keyboard Buttons
become a playable interface. Each button
corresponds to a different root voltage. When a voltage is active,
the corresponding button will be illuminated. The
CV Outputs
are
dependent on the
Chord Quality
,
Inversion
,
Voicing
, and
Transpose
parameters and vary on a per output basis. The gate output will be high
as long as a voltage is held.
Hold
Tap
