Instron 2716-016, Operator'S Manual

Page: 43 / 78

the bracket assembly between the jaw frames and the
shaft.
(f) Place the square portion of the shaft into the square
cutout of the bracket mounting post. Leave approxi-
mately
1/32
in. clearance between the grip body and
the post (see Figure 3-3). Tighten the clamping screw.
(g) Replace the grip faces.
(h) Replace the knurled clamp shaft nut removed in Step
(b).
(i) To convert the grips back to a vertical orientation, per-
form Steps (a) through (h) in reverse.
In
stalla
tion
Fiber Grips
3-5