Instron 2716-016, Operator'S Manual

Page: 6 / 78

Warning
Disconnect the electrical power supply
before removing the covers to electrical
equipment.
Disconnect equipment from the electrical power supply
before removing any electrical safety covers or replacing
fuses. Do not reconnect the power source while the covers
are removed. Refit covers as soon as possible.
Disconnect power supplies before
removing the covers to rotating machinery.
Disconnect equipment from all power supplies before re-
moving any cover which gives access to rotating machin-
ery. Do not reconnect any power supply while the covers
are removed unless you are specifically instructed to do so
in the manual. If the equipment needs to be operated to
perform maintenance tasks with the covers removed, en-
sure that all loose clothing, long hair, etc. is tied back. Re-
fit covers as soon as possible.
Shut down the hydraulic power supply and
discharge hydraulic pressure before
disconnection of any hydraulic fluid
coupling.
Do not disconnect any hydraulic coupling without first
shutting down the hydraulic power supply and discharging
stored pressure to zero. Tie down or otherwise secure all
pressurized hoses to prevent movement during system op-
eration and to prevent the hose from whipping about in
the event of a rupture.
Preliminary Pages M10-82716-14
vi