background image

STEP 14 

Proper use of the 5-point safety harness for one or two children

 

 
14A 

14B 

 

WARNING

 

To avoid serious injury children should always wear the seat belt and shoulder straps!

 

 
14A.  Proper seating position for one child 

A.  Undo the lap belt buckle and seat the child in the center of the trailer/stroller. 
B.  Buckle the lap belt over the child’s lap, and pull the strap until the belt is snug. 
C.  Place the two center shoulder straps over the child’s shoulders, and clip both straps into the 

“D” ring of the center crotch strap. 

D.  Adjust the shoulder strap height according to the height of the child, then pull the straps until 

they are snug. 

IMPORTANT! Adjust the straps so that the crotch strap and shoulder straps meet at 
the child’s stomach level, not at chest level! 

E.  Clip the outer shoulder strap on either side into the “D” ring of the outer crotch strap directly 

below.  This will keep the straps that are not in use out of the way. 

  

 

14B.  Proper seating position for two children 

A.  Undo the lap belt buckle and seat the children side by side in the trailer/stroller. 
B.  Buckle the lap belt over both children’s laps, and pull the strap until the belt is snug. 

(Note: There is only one lap belt for both children.) 

C.  Place one outer pair of shoulder straps over the shoulders of the child seated on that side, 

and clip both straps into the “D” ring of the outer crotch strap directly below.   

D.  Adjust the shoulder strap height according to the height of the child, then pull the straps until 

they are snug. 

IMPORTANT! Adjust the straps so that the crotch strap and shoulder straps meet at 
the child’s stomach level, not at chest level! 

E.  Repeat for the child seated on the other side. 

(Note: The center crotch strap will not be clipped to any shoulder straps.) 

 
 

REMOVAL, DISASSEMBLY, AND STORAGE INSTRUCTIONS 

 

Entering and exiting the passenger compartment 

1.  Unclip the front panel clasps near the front corners of the trailer/stroller. 
2.  Fold the front flap down and underneath the trailer/stroller so that it is out of the way. 
3.  Assist children as they enter and exit the passenger compartment.  (See STEP 14 of the 

Owner’s Manual for instructions on the proper use of the 5-point safety harness.) 

 

 

8

Summary of Contents for QE100A











Reviews: