6
Care and Maintenance
Check fasteners
After one hour of use, check all fasteners to make sure they are secure. Adjust if necessary.
Periodically check the stroller to ensure that it is in good operating condition.
To adjust the stroller from veering - not rolling straight:
Open the front Q/R lever, point the front wheel forward or in the opposite direction the stroller is
veering, then close Q/R lever. Repeat if necessary.
To adjust front brake caliper:
For micro adjustment, turn the front brake caliper’s adjusting sleeve. Once the brake pads are
adjusted to the desired distance from the rim, tighten the lock ring. Periodically you will need to
adjust the cable since it is normal for the cable to stretch from use (see Figure F, page 4).
To clean seat and canopy:
If light cleaning is required, use a soft cloth with warm water and mild soap then air dry. If heavily
soiled, remove plastic reinforcements from the backrest and unsnap seat and canopy from frame.
Make sure you make note on how the seat and canopy are assembled onto the frame. Place seat
and canopy in washing machine on GENTLE cycle. Replace reinforcements and snap seat and
canopy back onto stroller and allow to air dry. Do not put in dryer. DO NOT BLEACH.
To clean frame:
Wipe using a soft cloth with warm water and mild soap. Air dry. DO NOT USE polish or harsh
abrasives.
**
WARNING:
If you have any questions concerning the safe use of this product, please
contact InSTEP LLC before using.
1-800-242-6110
8am-5pm CST, Monday-Friday, or MAIL to:
314 West 86th Street
Bloomington, MN 55420
Tel: 1-800-242-6110
or visit our web site at www.instep.net
email: [email protected]
