This information given in good faith and is based on the latest knowledge available to InStar UK Ltd. Whilst every effort has been made to ensure that the contents of the publication
are current while going to press, customers are advised that products, techniques and codes of practice are under constant review and liable to change without notice.
InStar UK Ltd
, Holland House, Valley Way, Rockingham Road, Market Harborough, Leicestershire LE16 7PS | T: +44 (0)1858 456949 | E-mail: [email protected]
Installation Guide
Page 2
2. Assembling
• To assemble the frame, use the junction tab along with the
horizontal and vertical angle brackets.
• Tools: screwdriver and level.
• If the installation is longer than 3 metres, you can easily
connect two profiles - Connect the profile lengths using
junction tab and Profildeck screws.
• Place junction tab outside the profile.
• Pre-drill using the junction tab as a template.
• Pre-drill through holes using a 4 mm metal drill.
• Slide the 1st junction tab inside the profile and fix with 2 screws.
• Slide the 2nd junction tab inside the profile and fix with 2
screws.
• Ensure there is a 1 mm gap between the two profiles.
Using a horizontal junction angle bracket:
• To connect noggins.
• To create a U shape or L shape installation.
• Place horizontal junction bracket outside the profile.
• Fix with 2 screws using the slotted holes.
• Fix using a ProfilDeck® screw 4.8 x 19 mm tightened to a
torque of 2.5n. (The tightening torque is 8 on 20 for an 18 volts
screwdriver).
• Slide the 1st junction tab inside the profile and fix with 2 screws.
• Slide the 2nd junction tab inside the profile and fix with 2
screws.
• Ensure there is a 1 mm gap between the two profiles.
PFD
PROFILDECK ALUMINIUM SUB-FRAME SYSTEM
