3
Page
How to Configure the Remote Alarm Controller Settings in THOR’s Unit Setup Menu
You can also configure the Warning/Alarm settings from within THOR software and send the Setup File to the
monitoring unit. (Only available for Micromate and Minimate Pro models)
1. Within THOR, click on the
Unit Tab.
2. Click on the
Unit Setup
icon.
3. In the
Unit Setup
section, right-click and select
New Unit Setup File.
4. Fill in the details and under
Unit Type
select either
Micromate
,
or
Minimate Pro
(you must also select the Setup Type:
Compliance.)
5. Select
Unit Setup
section and under
Auxiliary IO
select
Remote Alarm
.
6. Fill in the appropriate
Warning Hold Time
in seconds and
Alarm Hold Time
in seconds.
7. Under
Active Sensors
click the
Add Sensor
button and select a sensor.
8. Check
Enable Alarm
, then define the Alarm Level (in mm/s or in/s for Geophones, in dB(A) for Microphones)
Note: the alarm level cannot be lower then the defined trigger level.
9. Click on
OK
10. Select the Monitoring unit connected to THOR and click
Send to Unit(s)
to send the Setup File to the Monitoring unit.
1
2
3
4
6
5
8
9
7
10