background image

•  Similarly, set the DAY of the week  

(e.g. Sun=1, Mon=2, Tue=3 etc).

•  To exit user menu, press & hold ECO 

button for approximately 5 seconds then 

release. (Screen will show “WAIT” whilst any 

changes are being saved). 

 

To Enable and Set-up Seven-day Timer – 
see page 8

Eco Mode/Power Saving

The ECO mode is activated by pressing the ECO 

button (leaf symbol). The screen changes to 

Green. This saves energy by switching the boiler 

operating capacity to half volume, ideal on quiet 

days in the season. Simply push the ECO button 

again to revert to full capacity.  

Regular Daily Use

Switch boiler on and wait for the screen to turn 

white and show “READY” message. The water 

will then be at the correct temperature.
Dispense water via the lever tap.  

(

CAUTION

: Boiler dispenses near-boiling water). 

AQ35 Multi-Filter 

Instanta’s new built-in filtration system ensures 

that water is always to the highest standard, 

whilst delivering lower maintenance costs and 

improved energy efficiency. 
Quick and easy to change, the new filter reduces 

sediment, chlorine taste & odour, and lime-scale 

via a slow release scale inhibitor, providing 

better water and therefore, better quality drinks.

Filter Replacement:

A series of bars on the FILTER display shows 

the estimated remaining life in the current filter 

cartridge. When the filter has just 200 Litres 

remaining (or a period of 6 months has expired), 

the filter icon will begin to flash as a reminder. 

When the filter needs replacing, the screen will 

show the message; CHANGE FILTER.
The boiler will continue to operate with the 

CHANGE FILTER screen but scale may build 

up more rapidly and the water taste may be 

affected. 

 

Replace the filter as follows;
1.  Switch boiler off and draw down water to tap 

level.

2.  Open filter door 

3.  Grip Cartridge and rotate a quarter-turn to 

the left and pull forward. CAUTION: A small 

amount of water will drain from the head.

5

Summary of Contents for CPF210













Reviews: