15
Cooking with the Omni Plus Toaster Oven
CAUTION
Metal and glass surfaces and accessories will be hot during and after cooking.
Donot touch the appliance or attempt to insert or remove accessories without proper
hand protection.
Convection cooking and air frying uses rapid air circulation to heat the oven up
fast, so food cooks quickly and evenly.
Initial Test Run
Follow these steps to familiarize yourself with the Instant Omni toaster oven and
ensure it is operating properly. Once the Initial Test Run has completed, you may
use these same steps to start cooking.
Approximate time: 25 minutes
1.
Open the oven door.
Place the cooking pan on the bottom of the cooking chamber.
Close door.
2.
Plug the power cord into a 120 V power source.
Display indicates
OFF
signifying that the oven is in Standby mode.
3.
Press the
Air Fry
Smart Program button. Turn the
Presets
dial to select the
Wings
preset.
Note:
The default Air Fry/Wings Smart Program cooking temperature is 400ºF/205ºC.
The default time is 12 minutes.
4.
Press the
Start
button on the right side of the control panel to begin cooking.
The display indicates
On
when the oven is in
Preheat
mode.
Note:
At any time, you may turn the
Temp/Time
dial to adjust the cooking temperature
or time.
5.
When the oven reaches the Smart Program cooking temperature, the cooking
time will start to count down on the display.
Note:
For the test run, do not add food to the cooking chamber.
6.
Partway through the Air Fry Smart Program cooking time, the oven will beep
and indicate
turn Food
to remind you to turn your food. Open the door to
automatically pause the Smart Program then close the door to resume.
Note:
The turn Food reminder only appears when using Air Fry and Roast Smart
Programs and only if Rotate is not turned on.
Note:
Cooking will recommence after 10 seconds whether food has been turned or not.
7.
The display will count down the last minute of cooking time in seconds.
When the Smart Program is complete, the display indicates
End
and the fan
turns on automatically to cool the oven.
Note:
The Omni Plus emits a Smart Reminder at 5, 20, and 60 minutes after the Smart
Program ends to remind you about your dish.
